Because Hyper-V Server 2008 R2 does not have a GUI, all tasks needed to set up an iSCSI initiator need to be done either remotely or from the command prompt.

The iSCSI initiator service needs to start automatically(this can also be done remotely by opening a MMC, adding the services snapin and connecting to the Hyper-V Server): sc config msiscsi start= auto

Start the service (most likely the SC command will already trigger the starting of the service): net start msiscsi

Connect to the iSCSI target Server: iscsicli QAddTargetPortal 10.0.0.1

Now get a list of iSCSI targets: iscsicli ListTargets

Next, copy the target you want and run this command (replace the iqn with your own): iscsicli persistentlogintarget iqn.1991-05.com.something:server-vms-target T * * * * * * * * * * * * * * * 0

Now reboot: shutdown /r /t 10

And verify if the disk is actually mounted. You can do so with either diskpart.exe on the server itself, or you can open an MMC from another computer, add the disk manager snap in and verify visually.

Add your comment

Your name:
Your website:
Subject:
Comment:
Word verification:
	Post Preview

windows vista ultimate x86 sp1 integratedblank white jigsaw puzzles for printerfree online advanced level math worksheetsH&R TaxCut Home and Business 2007 (US Only)BreakPoint Hex Workshop 6.0Plato DVD to 3GP Converter 7.8robert william painted wine glasscarrot styx rod blanksblank rome law firmJoboshare DVD Copy 2.7Autodesk AutoSketch 9.0spawning salmon printWinsor Computing Hex Toolbox 2.3

yvComment v.1.16.0